Buda başka bir sunucu:
-- MYSQL PERFORMANCE TUNING PRIMER --
- By: Matthew Montgomery -
MySQL Version 4.0.25 is EOL please upgrade to MySQL 4.1 or later
Uptime = 11 days 18 hrs 53 min 23 sec
Avg. qps = 9
Total Questions = 10099373
Threads Connected = 1
Server has been running for over 48hrs.
It should be safe to follow these recommendations
To find out more information on how each of these
runtime variables effects performance visit:
http://dev.mysql.com/doc/refman/4.1/...variables.html
Visit
http://www.mysql.com/products/enterprise/advisors.html
for info about MySQL's Enterprise Monitoring and Advisory Service
SLOW QUERIES
Current long_query_time = 10 sec.
You have 129 out of 10099385 that take longer than 10 sec. to complete
The slow query log is NOT enabled.
Your long_query_time may be too high, I typically set this under 5 sec.
WORKER THREADS
Current thread_cache_size = 100
Current threads_cached = 54
Current threads_per_sec = 0
Historic threads_per_sec = 0
Your thread_cache_size is fine
MAX CONNECTIONS
Current max_connections = 300
Current threads_connected = 1
Historic max_used_connections = 54
The number of used connections is 18% of the configured maximum.
Your max_connections variable seems to be fine.
MEMORY USAGE
Max Memory Ever Allocated : 131 M
Configured Max Per-thread Buffers : 316 M
Configured Max Global Buffers : 74 M
Configured Max Memory Limit : 390 M
Physical Memory : 501.48 M
Max memory limit seem to be within acceptable norms
KEY BUFFER
Current MyISAM index space = 66 M
Current key_buffer_size = 512 K
Key cache miss rate is 1 : 21
Key buffer fill ratio = Unknown %
Your key_buffer_size seems to be fine
QUERY CACHE
Query cache is enabled
Current query_cache_size = 64 M
Current query_cache_used = 47 M
Current query_cache_limit = 1 M
Current Query cache Memory fill ratio = 74.51 %
./tuning-primer.sh: line 345: [: query_cache_min_res_unitHR: integer expression expected
./tuning-primer.sh: line 351: [: query_cache_min_res_unitHR: integer expression expected
./tuning-primer.sh: line 357: [: query_cache_min_res_unitHR: integer expression expected
./tuning-primer.sh: line 364: export: `=query_cache_min_res_unitHR': not a valid identifier
Current query_cache_min_res_unit = bytes
Query Cache is 13 % fragmented
Run "FLUSH QUERY CACHE" periodically to defragment the query cache memory
If you have many small queries lower 'query_cache_min_res_unit' to reduce fragmentation.
MySQL won't cache query results that are larger than query_cache_limit in size
SORT OPERATIONS
Current sort_buffer_size = 100 K
Current record/read_rnd_buffer_size = 256 K
Sort buffer seems to be fine
JOINS
Current join_buffer_size = 132.00 K
You have had 526 queries where a join could not use an index properly
You should enable "log-long-format"
Then look for non indexed joins in the slow query log.
If you are unable to optimize your queries you may want to increase your
join_buffer_size to accommodate larger joins in one pass.
Note! This script will still suggest raising the join_buffer_size when
ANY joins not using indexes are found.
OPEN FILES LIMIT
Current open_files_limit = 1510 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
Your open_files_limit value seems to be fine
TABLE CACHE
Current table_cache value = 64 tables
You have a total of 1597 tables
You have 64 open tables.
Current table_cache hit rate is 0%, while 100% of your table cache is in use
You should probably increase your table_cache
TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 32 M
Of 146715 temp tables, 11% were created on disk
Effective in-memory tmp_table_size is limited to max_heap_table_size.
Created disk tmp tables ratio seems fine
TABLE SCANS
Current read_buffer_size = 96 K
Current table scan ratio = 1248 : 1
read_buffer_size seems to be fine
TABLE LOCKING
Current Lock Wait ratio = 1 : 1604
You may benefit from selective use of InnoDB.
If you have long running SELECT's against MyISAM tables and perform
frequent updates consider setting 'low_priority_updates=1'